Pod Drive 3.0 | 6 HP
Pod Drive 3.0 | 6 HP
Pod Drive 3.0 | 6 HP
Pod Drive 3.0 | 6 HP
  • Load image into Gallery viewer, Pod Drive 3.0 | 6 HP
  • Load image into Gallery viewer, Pod Drive 3.0 | 6 HP
  • Load image into Gallery viewer, Pod Drive 3.0 | 6 HP
  • Load image into Gallery viewer, Pod Drive 3.0 | 6 HP

Pod Drive 3.0 | 6 HP

Regular price
Dhs. 0.00
Sale price
Dhs. 0.00
Regular price
Sold out
Unit price
per 

WHY POD DRIVE 3.0

Doesn't take much space

Perfect for small boats and sailboats.

Virtually silent

Only you and nature will be there.

Without maintenance

Save maintenance time and spend more time in the water.

No leakage

Smoke and combustion free.

 

POD DRIVE 3.0 SYSTEMS 



ABOUT THE PRODUCT

Pod Drive 3.0             Speed ​​(mph / kph) Operating time (hh: mm)  Range (mile / km)
300  3.7 / 6 13:20 49.3 / 79.3
550 4.7 / 7.5 7:25 35 / 56.3
1000 5.3 / 8.6 4:00 21.2 / 34.1
1500 6 / 9.7 2:40 16 / 25.7
2000 6.3 / 10.2 2:00 12.6 / 20.4
2500 8 / 12.8 1:35 12.7 / 20.5
3000 10.2 / 16.4 1:20 13.6 / 21.9

Performance data is based on a 20-foot boat, with one person, and an E80 battery in calm water. Actual speed, range, and runtime may vary depending on boats, cargo, weather, etc. 

 

Input power  3 kW
Nominal voltage
48 V
Input voltage range 
39 V - 60 V
Equivalent to horsepower
6 CV
Weight*
12 kg / 26.5 lbs
Propeller 26 × 17.1 cm / 10.2 × 6.7 inches

* The weight of the Pod Drive 3.0 is calculated with the built-in control.

 


Motor Pod drive 3.0

1 Piece Set


Pod Drive 3.0 Control Box

1 Piece Set


Emergency switch

2 pieces 


Battery connector cable

1 piece 


M5 Hex Socket Head Screws

2 pieces 


User manual and warranty card

1 Piece Set


Battery connector cable 

3 pieces 


Communication cable 

1 piece 

 




  • Can I use Pod Drive 3.0 in the saltwater?
    • Yes, all ePropulsion motors can be used in saltwater. We have hard anodic oxidation coating and Teflon coating on high-quality corrosion-resistant aluminum alloy body, so it can stay in the saltwater for many years without being corroded. You could refer to this blog.
  • Does Pod Drive 3.0 have the similar performance as Navy 3.0?
    • Pod Drive 3.0 is the lower unit of Spirit 1.0. So they have exactly the same performance.
  • CanI I use the 3rd party battery to power Pod Drive 3.0?
    • Yes, you can. There’re requirements for third-party batteries:
      • Continuous discharge current should be over 62.5A for Pod Drive 3.0.
      • Nominal battery voltage should be 48V. To make a 48V battery pack, you may connect 12V or 24V batteries in series.
      • For the lead-acid battery, make sure you buy a deep cycle battery. AGM or Gel are preferred because they’re maintenance-free.
  • Will the controller display battery status info when using third-party batteries?
    • Yes, but it will not be accurate as when you use the original ePropulsion battery. 
    • We recommend you to use ePropulsion original E-Series batteries to provide the best experience. The unit price of the E-Series batteries is as low as  €0.42 per Wh, the half price of the normal LFP batteries. Also the 3rd party battery can not be connected with Pod Drive 3.0 with a communication cable, so the outboard can’t read the BMS data. There will be a remaining runtime data discrepancy up to 20% on the LED display.